The FP5 receiver is a lightweight, durable, battery-powered portable receiver that is designed for on-camera mounting. Featuring Automatic Frequency Selection and Automatic Transmitter Setup, diversity antennas, and output via TA3F cable to either XLR or 1/8” connectors. For use with FP Wireless Transmitters and SLX Wireless Transmitters.
Features
- Shure patented Audio Reference Companding for crystal-clear audio
- Automatic Frequency Selection locates an open frequency at the touch of a button
- Automatic Transmitter Setup instantly syncs the transmitter to the receiver frequency
- Power LED with low battery indicator
- RF LED indicates transmitter sync when illuminated
- 24 MHz bandwidth
- Up to 20 compatible systems simultaneously (region dependent)
- Powered by 2AA batteries – no power cord required
- Receiver output level control manages output to camera/mixer
- TA3F cable output to either XLR or 1/8” connectors (included)
- Diversity antennas for consistent reception of signal transmission
- Rugged and lightweight Shure construction
- Camera Shoe Mount (included)
Further Technical Specs
| Audio Output Type | TA3F |
| Configuration | Impedance balanced |
| Pin Assignments | 1=ground, 2=hot, 3=cold |
|
Maximum Audio Output Level.
Ref ±38 kHz deviation with 1 kHz tone |
–5 dBV (into 600 Ω load) |
| Impedance | 200 Ω |
| Dimensions | 108 mm X 64 mm X 19 mm (H x W x D) |
| Weight | 81 g (3 oz.) |
| Housing | Molded polycarbonate case |
| Sensitivity | –108 dBm for 12 dB SINAD, typical |
| Power Requirements | LR6 AA batteries, 1.5 V |
| Battery Life | up to 12 hours (alkaline) |
.jpg)
